.png)
Hantek 6074BC 70MHz 4 Ch USB Oscilloscope
The automotive diagnostic oscilloscope is a necessary tool for troubleshooting sensors, solenoids, actuators, primary and secondary ignitions, communication data stream, etc. The specialized automotive oscilloscope is also called automotive lab scope, engine analyser or motor-tester.
When checking circuits, power supplies and grounding, the signals often change too rapidly to check with a Multimeter. Often there are no trouble codes saved in the ECU but the problem exists because a trouble code is only recorded when there is a broken or short to the positive or the negative power supply or the sensor/actuator is faulty. However, if a sensor/actuator has stopped working in some mid position, there is no DTC recorded. In such case the automobile diagnostic oscilloscope is your most needed instrument.
With performance that rivals many benchtop oscilloscopes, the Hantek6074BC has 4 analog channels, 1GSa/s real-time sampling rate, 2mV-10V/DIV input sensitivity, 70MHz bandwidth, powered by a USB 2.0 Interface> It is a plug and play device with a small size for portability.
Specifications | |
Bandwidth | 70MHz |
Channels | 4 |
Real-time Sampling Rate | 1GSa/s |
Memory Depth | 64K |
Time Base Precision | ±50ppm |
Time Base Range | 2ns/div-1000s/div (1-2-4 sequences) |
Input Impedance | 1MΩ 25pF |
Input Sensitivity | 2mV/div?10V/div |
Vertical Resolution | 8Bit |
Vertical Displacement Range | 2mV ~ 10V/div @ x1 probe; 20mV ~ 100V/div @ x10 probe 200mV ~ 1000V/div @ x100 probe; 2V ~ 10000V/div @ x1000 probe |
DC Gain Accuracy | ±3% |
Bandwidth Limit | 20MHz |
Trigger Mode | Edge, Pulse, Video, Alternative |
Trigger Source | CH1, CH2, CH3,CH4 |
Waveform Signal Process | +,-,x,÷,FFT, Invert |
Cursors Measurement | Cross, Trace, Horizontal, Vertical |
Auto Measurement | Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot, Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle |
Size | 6 57/64" x 4 9/64" x 63/64" 175mm x 105mm x 25mm |
Weight | 1.98 lbs 0.9KG |
Accessories Included | 2 passive probes, 2 aligator clip leads |
4 analog channels, 1GSa/s sampling rate, 70MHz bandwidth
Over 20 functions, including pass/fail test, trigger, dynamic cursor tracking, waveform record and replay
Heat-resistant and scratch-proof compact case
Compatible with Win 7/8/10, Android via H-scope/Openscope, Linux via Openhantek, and OSX through virtual box/machine
Provides development library DLL with Labview/VC/VB development examples