top of page

8CH Automotive Diagnostic Digital Oscilloscope


Hantek 1008C- a Must Have for Automotive Diagnostic Oscilloscope


  • 8 channels;
  • Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.)​;
  • Video Help Function, provides the video help of diagnostic which can be watching online,
  • Transmit signals through USB 2.0 interface plug and play;
  • The Hantek HT1008C is a USB oscilloscope that is designed for basic automotive measurements and diagnostic tests for a nice price.
  • The HT1008C has 20 automatic automotive measurements (Ignition, sensor, starter etc.) and a built-in Fast Fourier Transform function.
  • With these measurement functions diagnosis can be done on sensors such as speed or MAP sensors but also general diagnostics of low voltage components can be done. Furthermore, diagnosis of both the primary and secondary ignition circuit can be done.
  • The connection with a Windows XP/7/8/10 PC is made through USB. On the PC results can be displayed, saved, exported, recorded and replayed.



Bandwidth100 kHz (single channel)
Memory depth4000 pts
Sample rate2.4 MSa/s (single channel)
Resolution12 bits
Vertical scale10 mV/div - 5 V/div
Horizontal scale1 ns/div - 20000 s/div
MathAddition, subtraction, multiplication, division
FFTRectangular, Hanning, Hamming, Blackman Window
Frequency range (Square signal generator)0 - 250 kHz

USB 2.0


General Oscilloscope


  • Analog Channel: 8
  • Input Impedance: Resistance: 1MΩ
  • Input Sensitivity: 10mV/div to 5V/div
  • Input Coupling: DC
  • Resolution: 12 bits
  • Memory Depth: 4K
  • Real-Time Sampling Rate: 2.4MSa/s
  • Time BaseRange: 1ns/div to 20000s/div(1-2-5sequences)
  • Time Base Precision: ±50ppm
  • Trigger Source: CH1, CH2,CH3,CH4, CH5, CH6,CH7,CH8


Automotive Diagnosis


  • Vehicle Diagnostic Function ; Ignition/Secondary
  • Sensors ; Air Flow Meter/Camshaft/Crankshaft/Distributor/Lambda Sensors/Throttle Position
  • Bus Diagnosis ; CAN Bus/ LIN Bus
  • Engine


Programmable Signal Generator

  • Channel: 8CH
  • Ouput level: LVTTL
  • Frequency Range: 0-250kHz




  • The diagnosis result can be saved as the format of txt, csv, rfc, xls, doc, jpg and etc. It is convenient to be checked and compared later;
  • The result can be printed with one button and generate diagnosis report which is easy to be saved and recorded;
  • Supports to record and replay the waveform. The waveform can be save into the computer hard disk and easy to read. There is no limit to the record time which can long-time measure and record the waveform for troubleshooting.


8CH Automotive Diagnostic Digital Oscilloscope

    Product Page: Stores_Product_Widget
    bottom of page